Hello everyone, I'm looking for a drawing of a pony dressed as a diver to do the 1st !!! stamp of a friend, we nickname her very affectionately Poly (like Poly in Spain, the TV series with a little pony that the under 50s cannot know… ..), and we want to give her this stamp. I searched the internet without success …… Thanks in advance.
Fabrice PHILIPPE
14 comments
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hello,
Not easy your thing. If I had to do it, I would take a pony sitting on the internet. I would print it in a fairly large size (10cm) and glue or draw a block on its back. After, reduction to the photocopier to see if it's okay and then you see if the engraver can do it.
Here is the drawing I found, if that inspires you:
Hi floriane duc-bragues
For my part, the first part of this new life has ended. I passed my BEES1 last October. And now I am in the process of creating my diving structure in the Var. I am delighted with this. And if I can help you with your project, don't hesitate. What exactly are you up to? What degree do you want to obtain? A lot of the things I experienced last year went without a book!